Carbon Steel Flange

• BS 4504 Hubbed Slip-on For Welding PN 40 DN 350 OEM Servi...

  Slip On Flanges are preferred by some contractors, over the Weld-neck, because of the lower initial cost. However, this may be offset by the added cost of the two fillet welds required for proper...

• BS 4504 Weld-neck Flange PN 16 DN350 From Cangzhou Sinhoo...

  The weld neck flange is suitable to used for high pressure, high temperature, low temperature situation because of the butt welding connection method. The weld neck flange has a good excellent...

• BS 4504 Weld-neck Flange PN 16 DN300 From China Factory

  Weld Neck Flanges are flanges that designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress...

• BS 4504 Blank Flange PN 10 DN350 With High Quality Raw Ma...

  Blind pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for blind pipe flanges, the standard height is 1/16" for blind pipe flanges...

• BS 4504 Blank Flange PN 10 DN250 For Pipe Ending With Raw...

  A blind flange is useful for making repairs to a pipeline further up the line. In fact, during construction of a pipeline, a blind flange may be built into the final length of pipe. This allows...

• BS 4504 Plate Flange For Welding PN 6 DN100 For Gas And Oil

  Plate flanges are most often used to connect parts of pipelines and in highways. This is due primarily to the fact that the flat flange is easy to use, and has such properties as cheapness and the...

• BS 4504 Plate Flange For Welding PN 6 DN200 For Pipeline

  Plate flanges are most often used to connect parts of pipelines and in highways. This is due primarily to the fact that the flat flange is easy to use, and has such properties as cheapness and the...

• BS 4504 Plate Flange For Welding PN 2.5 DN650 With Raw Ma...

  Plate flange is a piece of steel in the form of a ring, which has holes for fastening the flange to the elements of the pipeline with bolts or studs. The steel flange is put on the pipe and welded...

• BS 4504 Standard Plate Flange PN 2.5 DN600 With Raw Material

  Plate Flanges, which are of wide variety, are manufactured mainly from plates. They are conforming to national & international standards and they are hubless. Plate flanges are produced from...

• ISO Certificated ASME B16.5 Weld Neck Rtj Carbon Steel Fl...

  Weld Neck Flanges are flanges that designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress...

• ANSI B16.5 Pipe Fittings RTJ Galvanized Steel Flange With...

  Slip-On Flanges are probably the most common type of flanges in the industry and are ideal for lower pressure applications. You do not have to specify the pipe schedule when using slip-on flanges...

• Cangzhou Customized Hot Galvanized Stainless Steel Pipe F...

  Slip-On Flanges are probably the most common type of flanges in the industry and are ideal for lower pressure applications. You do not have to specify the pipe schedule when using slip-on flanges...