Weld-Neck flanges or welding-neck flanges can be differentiated from all other types of flange by their long tapered hub.
The Welding neck flanges is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange.
A weld neck flange (also known as a high-hub flange and tapered hub flange) is a type of flange. There are two designs. The regular type is used with pipes. The long type is unsuitable for pipes and is used in process plant. A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts.
The flange above has 8 bolt holes, and a welding bevel of 37.5 degrees (red circle). All given dimensions are in millimeters. The raised face (RF) does not need to be specified, because according to ASME B16.5, each flange is standard delivered with a raised face. Only a different design (Ring Type Joint (RTJ), Flat Face (FF) etc.), should be specified.
Hot Tags: bs 4504 weld-neck flange pn 16 dn350 from cangzhou sinhoo of china, China bs 4504 weld-neck flange pn 16 dn350 from cangzhou sinhoo of china manufacturers, suppliers, factory, lapped flange, Joint Flange, DN175 904L FLANGE, DN175 439 FLANGE, PN100 STEEL FLANGE, Carbon Steel Socket Welding Flanges
