Carbon Steel Flange

• BS 4504 Hubbed Slip-on For Welding PN 40 DN 300 For Pipe ...

  Slip-on flanges, abbreviated as SOF, are designed to slip over the outside of pipe, long-tangent elbows, reducers, and swages. The flange has poor resistance to shock and vibration. It is easier...

• BS 4504 Weld-neck Flange PN 16 DN250 For Pipe Welding

  Weld neck flanges are the most popular flange type with a neck extension with a weld bevel at the end, this type of flange is designed to butt weld directly to pipe to provide a superior and...

• BS 4504 Blank Flange PN 10 DN200 For Pipe Welding

  The blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. This blind flange is available in various sizes and...

• BS 4504 Plate Flange For Welding PN 6 DN150 For Pipe Welding

  The welding technique of these is fillet weld, and thus these are not suitable for high pressure applications. Provided products are are resistant to corrosion. Proffered with a superior grain...

• BS 4504 Plate Flange For Welding PN 2.5 DN700 For Pipe Wl...

  Plate flange is also named plain flange, flat flange and slip on flange etc. A plate flange is a flat, circular disk that is welded onto the end of a pipe and allows it to be bolted to another pipe.

• ASME B16.47 Large Flanges 30 Inch WNF Class 600 A105 Seri...

  If the flange is ordered, the supplier want to know the material quality. For example ASTM A105 is a forged carbon steel flange, while A182 is a forged stainless steel flange.

• ASME B16.47 Large Diameter Steel Flanges

  These flanges are available in all of our stainless steel and chrome-moly grades, from ½” to 36” and beyond, class 150 to 2500. We also stock large diameter LDS Slip-On flanges in A105N, and can...

• ASME B16.5 Class 300 SO Flange DN500 A 182 Gr.F321H

  Slip-on flanges, abbreviated as SOF, are designed to slip over the outside of pipe, long-tangent elbows, reducers, and swages. The flange has poor resistance to shock and vibration.

• ASME B16.5 Class 150 BL Flange DN450 Material A 182 Gr.F321

  he blind flange is so named due to the lack of a bore: it is a solid flange. It is used to close off the ends of piping systems and pressure vessel openings. As such it can be used in an existing...

• Class 600 SO Flange DN200 A 182 Gr.F316L F ASME B16.5 For...

  Slip On Flanges are preferred by some contractors, over the Weld-neck, because of the lower initial cost. However, this may be offset by the added cost of the two fillet welds required for proper...

• ASME B16.5 Class 150 WN Flange DN400 Material A 182 Gr.F304L

  A weld neck flange (WN flange) means a flange has a neck for weld with the pipe, it is easily to recognized by their long tapered neck on the flange (The neck is also called hub in the weld neck...

• ASME B16.5 Class 300 SO Flange DN200 A 182 Gr.F317

  Our slip-on flanges are available with raised, flat, or RTJ faces, and are also available in orifice configurations.