Carbon Steel Pipe Fittings

• ASME B16.9 Carbon Steel 4*2 Inch Reducing Tee Pipe Fitting

  Tee is a type of pipe fitting,it is T-shaped with two outlets,the two outlets are 90° direction change to the main line.It is widely used as pipe fittings to connect pipelines with a pipe at a...

• JIS B2312 Carbon Steel SCH 40 90 Degree Elbow For Pipeline

  Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5 Degree Elbow Carbon Steel...

• Butt Welding Pipe Fitting 4 Inch SCH40 Carbon Steel A234 ...

  In the field of butt welding steel elbows, it looks like a half of the 90 degree elbow.Commonly,the 90 degree elbows can be a seamless elbow or a welded elbow. Bending the two ends of pipe to a...

• High Pressure Carbon Steel A234 WPB Large Diameter Pipe Cap

  It is commonly made from the one steel plate, so it should be seamless . The pipe end caps are available in various shapes, like the hemispherical, oval, round etc.

• ASME B16.9 6 Inch A234 WPB SCH40 Pipe Cap With Good Quality

  It is commonly made from the one steel plate, so it should be seamless . The pipe end caps are available in various shapes, like the hemispherical, oval, round etc. Cap is the pipe fittings...

• JIS Standard Sgp Elbow DN 150 6 Inch

  The 45 degree elbows usually are manufactured as LR (Long Radius) elbows.Only in little occasion, for example, very tight place, people use the short radius elbow.Because there is nearly no...

• ASME B16.9 A234 WPB DN100 4 Inch 45 Degree Steel Elbow

  In the field of butt welding steel elbows, it looks like a half of the 90 degree elbow.Commonly,the 90 degree elbows can be a seamless elbow or a welded elbow. Bending the two ends of pipe to a...

• Carbon Steel ASTM A234 WPB 6inch Sch40 Pipe Cap

  It is commonly made from the one steel plate, so it should be seamless . The pipe end caps are available in various shapes, like the hemispherical, oval, round etc.

• ASME B16.9 Carbon Steel Pipe End Cap 10 Inch SCH80

  Cap is the pipe fittings designed to be the ends of a piping.We mainly produce cap according to standards ASME,ANSI,API,EN,BS,JIS,GOST etc. It is used to block off the end of a piping system by...

• ASME B16.9 Carbon Steel 8*4 Inch Reducing Tee Pipe Fitting

  Tee is a type of pipe fitting,it is T-shaped with two outlets,the two outlets are 90° direction change to the main line.It is widely used as pipe fittings to connect pipelines with a pipe at a...

• ASME B16.9 Carbon Steel Pipe End Cap 8 Inch SCH40

  It is commonly made from the one steel plate, so it should be seamless . The pipe end caps are available in various shapes, like the hemispherical, oval, round etc.

• Carbon Steel Pipe Fitting 90 Degree Elbow A234 WPB

  The custom degree elbows can be manufactured directly from the production design,also can be cut from a standard elbow.For example,the cut the 70 degree elbows from a 90 degree one.