Carbon Steel Pipe Fittings

• JIS B 2312 Japanese Standard Fitting Reducer 65AX40A Mate...

  The pipe flow is affected by the inside diameter conical transition configuration which can be axially moved and externally reconfigured to provide for more economical reducer fittings. Thus,...

• JIS B 2312 Japanese Standard Fitting 90E(L) Elbow 50A Mat...

  Generally also contain small amounts of silicon, manganese, sulfur, phosphorus and carbon steel, in addition to carbon use can be divided into carbon steel and carbon structural steel, carbon tool...

• JIS B 2312 Steel Butt-welding Pipe Fittings-Japanese Stan...

  A steel pipe reducer is a component used in the pipelines to reduce its size from large to small bore in accordance to the inner diameter. The length of the reduction here is equal to an average...

• ASME B16.9 Elbow 14 Inch Material ASTM A234/WP11

  Carbon Steel Elbow is primarily used in the installation of industrial pipelines for changing the material flow in a specific direction. Available in different bending angles, these elbows are...

• ASME B16.9 Tee 12 Inch Material ASTM A234/WP12

  Tee is a type of pipe fitting,it is T-shaped with two outlets,the two outlets are 90° direction change to the main line.It is widely used as pipe fittings to connect pipelines with a pipe at a...

• ASME B16.9 Cap 10 Inch Material ASTM A234/WP1

  The convex cap have several shapes: a hemispherical cap, an elliptical cap, a dish cap, and a spherical cap. From the point of view of force, the hemispherical cap is gradually not good to...

• ASME B16.9 Reducer 6inchX4inch Material ASTM A234/WPC

  This reducer consists of the symmetrical and conical shaped fittings that enlarge or reduce the diameter equally about the center line. For an example, when 1” pipe transitions to ¾” pipe, then...

• ASME B16.9 Elbow 4 Inch Material ASTM A234/WPB

  n elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for...

• ASME B16.9 Factory-Made Wrought Buttwelding Fittings

  A steel pipe reducer is a component used in the pipelines to reduce its size from large to small bore in accordance to the inner diameter. The length of the reduction here is equal to an average...

• JIS B2311 CAP C 100A LG

  The convex cap have several shapes: a hemispherical cap, an elliptical cap, a dish cap, and a spherical cap. From the point of view of force, the hemispherical cap is gradually not good to...

• JIS B2311 REDUCER R(C) 80X40 STD

  The pipe flow is affected by the inside diameter conical transition configuration which can be axially moved and externally reconfigured to provide for more economical reducer fittings. Thus,...

• JIS B2311 ELBOW 90E(L) 300A XS

  A pipe elbow is one kind of pipe fittings which can change the liquid or gas flowing direction in a piping system. It is mainly used to connect two pipes,sometimes called a “quarter bend”.