Carbon Steel Flange

• ASME B16.5 Class 150 BL Flange DN300 Material A 182 Gr.F316H

  A blind flange is a solid disk used to block off a pipeline or to create a stop. Similar to a regular flange, a blind flange has mounting holes around the perimeter and the gasket sealing rings...

• ASME B16.5 Class 600 SO Flange DN200 A 182 Gr.F316

  Slip-On Flanges are probably the most common type of flanges in the industry and are ideal for lower pressure applications. You do not have to specify the pipe schedule when using slip-on flanges...

• ASME B16.5 Class 300 SO Flange DN400 A 182 Gr.F304

  Slip-on flanges, abbreviated as SOF, are designed to slip over the outside of pipe, long-tangent elbows, reducers, and swages. The flange has poor resistance to shock and vibration. It is easier...

• ASME B16.5 Class 300 SO Flange DN250 A 182 Gr.F12 C1.2

  The slip on flange has a low hub and slips onto the pipe prior to welding. Welding is carried out on the inside and outside to provide sufficient strength and prevent leakage. Slip on flanges are...

• JIS B 2220 WN Flange TG-G 40K 100A SFVAF1

  Weld Neck Flanges are flanges that designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress...

• JIS B 2220 WN RF 10K H 1000A SFVC1 Flange

  Weld Neck Flanges are flanges that designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress...

• JIS B 2220 TR FF 20K 100A SCS 13A Flange

  The slip on flange has a low hub and slips onto the pipe prior to welding. Welding is carried out on the inside and outside to provide sufficient strength and prevent leakage. Slip on flanges are...

• JIS B 2220 LJ 20K 350A SF 390A Flange

  Plate flanges are most often used to connect parts of pipelines and in highways. This is due primarily to the fact that the flat flange is easy to use, and has such properties as cheapness and the...

• JIS B 2220 Flange SOH FF 10K 250A SS 400

  Our slip-on flanges are available with raised, flat, or RTJ faces, and are also available in orifice configurations. A disadvantage of the flange is, that principle always firstly a pipe must be...

• JIS B 2220 Flange SOP FF ZN 5K 300A SS 400

  Plate flange is also named plain flange, flat flange and slip on flange etc. A plate flange is a flat, circular disk that is welded onto the end of a pipe and allows it to be bolted to another pipe.

• Germany Standard DIN 86029 PN10 DN700 Slip-on Flange

  The calculated strength from a Slip On flange under internal pressure is of the order of two-thirds that of Welding Neck flanges, and their life under fatigue is about one-third that of the latter.

• Germany Standard DIN 2655 PN25 DN400 Plate Flange

  ate flange is also named plain flange, flat flange and slip on flange etc. A plate flange is a flat, circular disk that is welded onto the end of a pipe and allows it to be bolted to another pipe.