DN450 Carbon Steel Seamless BW Pipe Fitting 12 Inch Tee

A Reducing Tee is also called “unequal tee“,which means the tee branch pipe diameter is not same with the run pipe of the tee.Commonly, in a reducing tee,the branch pipe diameter is smaller than the running pipe.But there are also some project the branch pipe diameter of the tee is bigger than the run pipe,it means the branch is the inlet of the flow .

Product Introduction

A straight tee means a tee of pipe fitting which the branch outlet has a 90 degree direction turning from the main pipe of the tee.Commonly people consider the straight tee as the equal tee,it is a mistake.Equal tee means a same sizes of the branch and main pipe of a tee.Straight tee means it has a side port at right angle to the run.

Standard: ASME/ANSI B16.9,MSS-SP-75,DIN 2615,EN 10253-2,JIS B2311,GOST 17378

Material: ASTM A234,ASTM 403,DIN 17175,EN10228 …Carbon steel,stainless steel,alloy steel.

Size: 1/2″-96″. DN15-DN2400

Connect method: Butt welding.

Type: Seamless: DN15-DN600,

Welded: DN15-DN1800

Hot Tags: dn450 carbon steel seamless bw pipe fitting 12 inch tee, China dn450 carbon steel seamless bw pipe fitting 12 inch tee manufacturers, suppliers, factory, D90 PL FLANGE, pipe reducer, tube cap, china carbon steel pipe fittings, 904L PL FLANGE, XXS STEEL TEE FITTING

ASME B16.9 Carbon Steel Butt Weld SCH20 SCH40 STD 8 Inch Equal Tee

Butt Welded Carbon Steel Elbow With Standard Of ANSI DIN JIS SGP

Send Inquiry