anchor flange catalog dimensions pdf
Anchor Flange is important in many thrust-control systems. Compare to Weld Neck Flange,Blind Flange, Blank Flange, Slip On Flange, Plate Flange, Spectacle Flange. It is essential when protecting pipeline pumping or gas stations. Anchor Flanges are most commonly welded into the line and covered in concrete, this immobilizes the pipe at predetermined locations and transfer built-up stresses to exterior structures. Anchor Flanges combat axial movement. They bear a resemblance to a collar, once it is attached to a pipe. They prevent the pipeline from moving by typically being placed onto a section of pipeline as it makes a turn or is at a bridge crossing.
A metal pipeline is known for its inherent movement caused by the flow of liquid, as well as contraction and expansion caused by temperature changes. By locking in an Anchor Flange and securing it’s position, the forces of flow pushing against the pipe are displaced on the earth. Know more please contact us sales@sinhoofit.com (www.sinhoopipeline.com)
They look similar to a weld neck flange, but it has two hubs on both sides to weld to the pipes. There are no bolt bores on Anchor Flanges and they help secure the position of the pipeline.
Anchor Flanges Material
Stainless Steel Anchor Flanges: ASTM A182, A240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Carbon Steel Anchor Flanges: ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
Alloy Steel Anchor Flanges: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Duplex Steel Anchor Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
Super Duplex Anchor Flanges: ASTM / ASME A/SA 182, A240 F 44, F 45, F51, F 53, F 55, F 60, F 61
Nickel Alloy Anchor Flanges:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)
Copper Alloy Anchor Flanges: UNS No. C10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu-Ni-70/30)
Low Temperature Carbon Steel Anchor Flanges: ASTM A350, LF2, LF3
Applications Of Anchor Flanges
Anchor Flanges are used in Chemical and petrochemical processing.
Anchor Flanges are used in electronics.
Anchor Flanges are used in processing equipment for maintaining product purity in handling foods, synthetic fibers.
Anchor Flanges are used in marine and offshore engineering.
Standard
ANSI/ASME:
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN:
DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
B.S:
BS4504, BS4504, BS1560, BS10, etc
Specification
Size: 1/2″ (DN15) – 100″ (DN2500)
Brand Name: EliteFlange
Class: Class 150, Class 300, Class 400,
Class 600, Class 900, Class 1500, etc
Specialize: As per drawing
Ordering information
required for all code
Design Code
Material
Design Pressure
Design Temperature
Installation Temperature
Allowable Concrete Bearing Stress
Corrosion Allowance
Run Pipe Diameter
Run Pipe Schedule Thickness
Other applicable moment and load information
Hot Tags: a105 anchor flange, China a105 anchor flange manufacturers, suppliers, factory, Ss flange, threaded rod flange, Flange slip on, socket weld valve, blind pipe flange, pipe flange welding
