Weld-Neck flanges or welding-neck flanges can be differentiated from all other types of flange by their long tapered hub.
The Welding neck flanges is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange.
A weld neck flange (also known as a high-hub flange and tapered hub flange) is a type of flange. There are two designs. The regular type is used with pipes. The long type is unsuitable for pipes and is used in process plant. A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts.
The flange above has 8 bolt holes, and a welding bevel of 37.5 degrees (red circle). All given dimensions are in millimeters. The raised face (RF) does not need to be specified, because according to ASME B16.5, each flange is standard delivered with a raised face. Only a different design (Ring Type Joint (RTJ), Flat Face (FF) etc.), should be specified.
Hot Tags: mengcun asme b16.5 astm a105 class 150 rf carbon steel welding neck flange for pipe connection, China mengcun asme b16.5 astm a105 class 150 rf carbon steel welding neck flange for pipe connection manufacturers, suppliers, factory, RTJ Flange, A105 CS FLANGE, 900 SS Flange, DN450 444 FLANGE, Steel F321 Flange, Stainless Steel Flange Nuts
